Total
Product(s) in
Compound thermos wallboard production line
Characteristics of the equipment
This machine adopts the technology of high pressing, and all the processes of producing as Putting the materials and cloth on, compounding, pressing,are completed by one time.This equipment is full automatic and stably running,and the specifications of the products can be adjusted according to your requirements.The products made from the machine have smooth and neat surface and high density.It is the novel type wallboard material in the building industry, and it greatly reduces labours,and changes the traditional way of vertical and horizontal moulds. For example, it needs fewer moulds, and owns high rate of turning over.it does not need to be heated by electricity or steam, and it can produce varieties of products.Moreover, it has better effect of sound proofing and heat preservation.
Advantages of the project.
1.The raw material is available everywhere in the world and without any terrain limitation.The main materials are: sawdust, straw and straw pole of different crops, adding other inorganic materials ,like talcum powder,industrial waste,diatom earth,coal ash, and then have a special process to complete. You may just have lower cost but faster and better result.
2. Full automatic and simple technology of production. No noise, No any waste pollution during producing period.
3. Consuming few energy, no need of high voltage or temperature. It takes the advantage of chemical reaction and release heat itself,then complete the production.
Product s properties
1 properties
Air-Dry Density <=(standards)50KG/sqm (Inspection Index)30.0KG/sqm
Dry Shrinkage <= 0.08% 0.051%
Bending Strength >= 1400N 5640N
Impact Strength No breaking after 3 times striking No breaking after 3 times striking
Transection thermal resistance(T=900mm) >=1.35(sqm.K)/W 1.36(sqm.K)/W
Area of thermal bridges <= 8% 2.22%
Sound reduction index 36dB
radioactivity /
2 Characteristics
Anti-Seismic characteristics?The unit weight is only 1/10 of solid bricks, and it has good properties of anti-seismic, it is fittable for both high-rise building or normal ones. It is even better use this material instead of colorful iton tiles in the building of factory.
2. Feasibility: The wallboards are accembled into plates or combination.You can nail,saw,dig,glue or paste it.
3. Low investment: The raw materials of this product are mainly argricultral and industrial waste, you can save a lot on production costs.Comparing to cement bricks,it can decease at least 20% on costs.
4.Energy-saving and environment-friendly products.
5.Usable floor area: As this products are thinner, you can save more than 10% of usable floor area.
6.Special characteristics: Fire-prevention,waterproof, impact ,resistance,acid/alkali-resistance, anti-aging.
Wallboard production line: Workshop,warehouse.
Workshop area: 300 sqm-800 sqm
Working people: 10-16
Power: 8-20kw
Profit Analysis
Costs Analysis
Raw Material: 19-25RMB/sqm( according to different thickness)
Wage of working people: 1RMB/sqm
Water and electricity: 0.5RMB/sqm
Equipment depreciation: 0.2RMB/sqm
Managing Costs: 1RMB/sqm
Total: 21.7RMB~27.7RMB/sqm
Profit Analysis:
For example, if production capacity is 800sqm per day,and selling at the price 58RMB, the profit per day= 800sqmx58RMB-800sqm x21.70RMB=29040RMB
Characteristics of the equipment
This machine adopts the technology of high pressing, and all the processes of producing as Putting the materials and cloth on, compounding, pressing,are completed by one time.This equipment is full automatic and stably running,and the specifications of the products can be adjusted according to your requirements.The products made from the machine have smooth and neat surface and high density.It is the novel type wallboard material in the building industry, and it greatly reduces labours,and changes the traditional way of vertical and horizontal moulds. For example, it needs fewer moulds, and owns high rate of turning over.it does not need to be heated by electricity or steam, and it can produce varieties of products.Moreover, it has better effect of sound proofing and heat preservation.
Advantages of the project.
1.The raw material is available everywhere in the world and without any terrain limitation.The main materials are: sawdust, straw and straw pole of different crops, adding other inorganic materials ,like talcum powder,industrial waste,diatom earth,coal ash, and then have a special process to complete. You may just have lower cost but faster and better result.
2. Full automatic and simple technology of production. No noise, No any waste pollution during producing period.
3. Consuming few energy, no need of high voltage or temperature. It takes the advantage of chemical reaction and release heat itself,then complete the production.
Product s properties
1 properties
Air-Dry Density <=(standards)50KG/sqm (Inspection Index)30.0KG/sqm
Dry Shrinkage <= 0.08% 0.051%
Bending Strength >= 1400N 5640N
Impact Strength No breaking after 3 times striking No breaking after 3 times striking
Transection thermal resistance(T=900mm) >=1.35(sqm.K)/W 1.36(sqm.K)/W
Area of thermal bridges <= 8% 2.22%
Sound reduction index 36dB
radioactivity /
2 Characteristics
Anti-Seismic characteristics?The unit weight is only 1/10 of solid bricks, and it has good properties of anti-seismic, it is fittable for both high-rise building or normal ones. It is even better use this material instead of colorful iton tiles in the building of factory.
2. Feasibility: The wallboards are accembled into plates or combination.You can nail,saw,dig,glue or paste it.
3. Low investment: The raw materials of this product are mainly argricultral and industrial waste, you can save a lot on production costs.Comparing to cement bricks,it can decease at least 20% on costs.
4.Energy-saving and environment-friendly products.
5.Usable floor area: As this products are thinner, you can save more than 10% of usable floor area.
6.Special characteristics: Fire-prevention,waterproof, impact ,resistance,acid/alkali-resistance, anti-aging.
Wallboard production line: Workshop,warehouse.
Workshop area: 300 sqm-800 sqm
Working people: 10-16
Power: 8-20kw
Profit Analysis
Costs Analysis
Raw Material: 19-25RMB/sqm( according to different thickness)
Wage of working people: 1RMB/sqm
Water and electricity: 0.5RMB/sqm
Equipment depreciation: 0.2RMB/sqm
Managing Costs: 1RMB/sqm
Total: 21.7RMB~27.7RMB/sqm
Profit Analysis:
For example, if production capacity is 800sqm per day,and selling at the price 58RMB, the profit per day= 800sqmx58RMB-800sqm x21.70RMB=29040RMB



